The TMC Pro Pond UV 110 watt is designed for large ponds, incorporating Ultrabead, Aquadyne, Bubblebead, Polygeyser and Nexus Eazy 300 filtration systems.
The TMC Pro Pond UV 110 watt can be used for pressurised systems up to 56psi.
The Pro Pond UV 110 watt has 2" solvent weld inlet and outlet ports and may be connected to either flexible or rigid plumbing using the appropriate plumbing fittings (not supplied). To ensure unrestricted flow, it is recommended that the TMC Pro-Pond 110 watt is not plumbed in with anything less than 11/2" pipework.
Suitable for ponds up to 16,000 imp gallons/72,000 litres (dependent on stocking density and the amount of sunlight the pond is subject to) with a max flow rate of 8000 imp gallons/36,000 litres per hour.
The TMC Pro Pond UV 110 watt has two individually chambered lamps for optimum efficiency and contact time.
The TMC Pro Pond UV 110 watt uses fused quartz glass sleeves which ensure that germicidal lamps are able to reach their optimum 'burn temperature' where the highest amount of UVc radiation is emitted. Also facilitates simple lamp replacement by keeping lamp separate from the pond water.
|TMC Pro Pond UV 110 watt
TMC Pro-Pond UV 110 watt features:
- Supplied complete with 5m cable and 4 wall mounting pipe clips.
- 930 mm long x 320 mm wide x 212mm high. Weight = 13.2kg.
Important Note: When ordering UV lamps please make sure you open the box to make sure the lamps are not broken before signing the delivery note, if the bulbs are damaged please sign the delivery note "Damaged" and refuse delivery.
A claim will ONLY be accepted if signed for as DAMAGED.