Ozone Venturi Injectors work by creating a negative pressure in the integrated air line connection and therefore ozone can be drawn into a suitable return pipe and mixed with the returning flow on route to the pond.
This is achieved by creating a seperate loop off the main return from the filter to the pond, ball valved to control the amount of flow through the Ozone Venturi Injector.
Venturi injection is an ideal method of ozone mixing for bead and all pressure filter installations, as the pumps required to run these filter systems are already powerful and therefore capable of running venturi mixing systems without further system modifications being required. Features built in non return valve to avoid reverse gas flow.
Ozone Venturi Injectors Specification:
3/4 inch male threaded connection, supplied with 3/4" imperial sockets and 6mm line connection nipple. 8mm compression fittings can also be supplied for use with Teflon pipe.
One inch male threaded connection, supplied with 1" imperial threaded sockets and 6mm line connection nipple. 8mm compression fittings can also be supplied for use with Teflon pipe.
Suitable for use with all KoiOzone Ozone generators
Max recommended flow rate 12000 litres / hour
Add to Cart
Venturi Injectors 3/4 inch male threaded connection